![]() What I've come to realize is that everything more or less halts if I use more than 3 types of OSC signals. 3) Launch the TouchOSC editor, and 'Open' one of the layout files. I'm working on a project where I'm controlling 4 stepper motors and a 12V LED strip. ( Android and iOS are supported, but not Windows phones ) 2) Also download the TouchOSC editor to your Desktop computer. I thought I'd give this a bump to ask if you've made a tutorial on Bonjour to evade changing TouchOSC IP addresses each and every time. Teensy is a great platform for that because it has so much more memory than the standard Arduinosand the Bonjour library is rather large in memory footprint. I've been meaning for a while to add the bonjour part to either this, or another tutorial but have not had the time. The other major drawback for ME is that without the Ethernet shield I cannot use Bonjour to announce an OSC service on the Network that would allow auto configuration in TouchOSC. Also, when manually entering my mac's ip in the app I get a connection timeout. My iphone is connected to my mac's network but it just doesn't show up in TouchOSC. This really hasn't turned out to be easy. #Touchosc editor help fullI have decided all that is not worth the effort for my projects. Now, however, I want to go about setting up my own templates in the TouchOSC editor to get full flexibility and control. If you do discover a bug you'll have to unhook USB, reprogram, reconnect USB etc. #Touchosc editor help serialNaturally this will be rather difficult to debug as you will have occupied the one USB port on the Teensy that is also the only way to program the Teensy.įor printing debugging messages in that case you could also not use the Serial Monitor as that works over USB but you would have to use one of the serial1/2/3 (Rx/Txt pins) connections on the Teensy hooked up to a terminal program. In that case you need to use at least the TL WR703n, a 702n will not work as it has too littel memory and a less sophisticated processor. #Touchosc editor help installYes, you would first have to install openWRT on your router. In my projects I use the Teensy in conjunction with a WIZ820io Ethernet Module that utilizes the much faster W5200 chip. However, a lot of the comments on the CNMAT site are based on the old Ethernet shield that uses the W5100 Ethenet chip. However, it it is the most performant connection in terms of data rate I cannot say.Ĭonnecting from the Teensy USB directly to an openWRT router may be more performant. I find it preferable to connect through an Ethernet shield because it gets you going very fast! Ok enough questions, thanks again for your tutorial, much appreciated Is that a lot more work? does that mean one has to install openWRT?Īnd lastly, ive seen an instruction on flashing the tp-link tlwr703 with english firmware The USB port of an OpenWrt router to get good performance and reliability with our library. Ive found this written in in the oscuino readme: Why is it preferable, if it is at all, to connect the teensy or arduino via an ethernt shield instead of plugging directly into a tp-link router via usb? In my research, I always refer back to your instructions, but have a few little queries before I go ahead and buy components and try. Hi, good work, really look foreward to try this and make some cool osc controllers for art/music performances ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |